Bathworks Premium Bathtub & Tile Refinishing Kit 22oz. w/Non-Slip Protection (BISCUIT)

I wanted to wait at least a month before writing a review to make sure it’s still looking great, and it is!Overall the process wasn’t bad, but be prepared for lots of prep (as with any product like this). To ensure it lasts, that tub needs to be beyond spotless so it all sticks. Everything you need to do that is supplied (aside from the Comet), which is great. However, I went and got a brush attachment for my drill, and used that with the Comet to speed up the prep. For about $10 at a hardware store, it was money well spent (plus you can reuse it for other projects).The non-slip additive works well, but I’d recommend mixing it with a little but more paint than the instructions say. I followed the directions to the “T”, and felt I needed just a little more to finish the floor as shown. The thing is that when you apply the non-slip to the floor, that’s it – the floor is painted. You shouldn’t apply more (non-slip) paint on top, or it will start smoothing it out.One more tip: be VERY careful with drips as you’re applying it. The instructions say to make sure the roller is always very wet, but that can result in a running paint situation down the walls of the tub. I’ve got several that you can notice when the light hits it right, so I should have kept a closer eye on it while it was just starting to dry to roll out any paint runs I saw.Also, at least double the amount of time they recommend before pulling up the painter’s tape around the tub – the paint stayed wet for me for a while longer, so there was a bit of a mess to clean up when I removed the tape.Overall I love this product and will be getting more to do the walls of the shower, too. Just follow the advice above and you’ll be golden. =)